Fence Spraying Telford
Get an even, streak-free finish across panels and gates with careful masking, solid prep, and exterior coatings selected for Shropshire weather.
A cleaner look than brushwork, in a fraction of the time
Fence spraying in Telford is the fastest way to refresh tired timber and get a consistent colour across a full boundary run. Spraying lays paint evenly into the grain and around arrises, so you do not end up with lap marks, heavy edges, or missed lines between slats. It also makes colour changes simpler, especially when you want to cover a faded brown with a modern grey or black.
We provide professional fence painting and spraying for timber panels, closeboard fencing, pickets, posts, rails, and gates across Telford and nearby Shropshire. You get a clear scope, tidy protection for patios and planting, and a finish that is built for outdoor exposure.
Every fence spraying job follows a clear exterior process: surface preparation, careful protection, controlled spray application and enough curing time before gates or garden items are put back into regular use.
Where fence spraying works best (and when it does not)
Spraying is ideal when you want a uniform finish across multiple panels, particularly on new or previously coated timber where a brush would take much longer. It is also a strong choice for slatted and featheredge styles where a roller struggles to reach.
It is not always the right method. If panels are heavily warped, rotten at the base, or flaking back to bare wood in patches, we may recommend extra prep, spot repairs, or a different approach for those sections so the coating does not fail early. On very windy days, spraying outdoors needs rescheduling or extra screening so overspray cannot travel.
In Telford's mix of newer estates and older properties, access varies a lot. If your fence backs onto an alley, a shared path, or a tight side return, we plan protection and equipment placement so we can still spray cleanly without coating next door's paving or planting.
What you get with our fence painting in Telford
Careful masking and screening
We protect decking, patios, walls, sheds, and nearby planting before any spraying starts, with special attention to boundaries and shared access.
Prep that matches the surface
Light cleaning, de-nibbing, scraping loose coatings, and targeted knot treatment where needed, so the paint bonds instead of sitting on dust or flaking edges.
Even finish across panels and posts
Spraying gives consistent colour and sheen across large runs, including the edges and the board profiles that are easy to miss with a brush.
Coatings chosen for exteriors
We use exterior-grade products suited to timber movement, rain exposure, and UV, rather than interior paints that chalk or peel outside.
Tidy work area at the end
Masking comes off cleanly, surfaces are checked for any stray misting, and gates are left operating properly once the coating is safe.
-
01
Quick assessment and colour plan
We check timber condition, existing coatings, and how much of the fence is accessible from your side. We also confirm colour, finish, and whether posts, gravel boards, and gates are included.
-
02
Prep and protection
We clear the line, cover hardstanding and nearby items, and mask edges where a crisp line matters, for example where a fence meets a wall or paving. Any loose paint gets scraped back and sanded smooth.
-
03
Spray application in controlled passes
We apply in light, even coats to avoid runs and heavy build-up. Coverage is checked panel-by-panel so you do not get thin sections or missed edges.
-
04
Second coat where required
Most colour changes and most bare or weathered timber need two coats for durability and a consistent finish. Drying times depend on temperature, shade, and airflow.
-
05
Final check and curing advice
We remove masking, inspect for uniformity, and leave practical guidance on touch-dry and full cure so you know when it is safe to hang items back on the fence or close gates regularly.
Fence spraying results (the finish you should expect)
How Much Does Fence Spraying Cost in Telford?
Fence spraying in Telford typically ranges from about £250 to £600 for a smaller run, for example a back garden line and gate, while longer boundary runs and full perimeter jobs often sit around £700 to £1,500+ depending on access and prep. Two-coat colour changes and heavily weathered timber cost more than a straightforward refresh coat.
Price depends on total metres and height, how much is reachable from your side, condition including cleaning, scraping and sanding, the number of coats, and how much masking is needed around patios, sheds, and planting. The exact cost is confirmed after viewing the fence and agreeing the written scope.
Fence spraying FAQs (Telford)
Is fence spraying better than brushing for timber panels? +
For most garden fences, spraying gives a more even finish faster, especially on slatted, featheredge, and large runs where brush marks and missed edges are common. Brushing can still be better for very rough timber, detailed repairs, or small touch-ups where setting up masking would take longer than the painting itself.
Do you spray both sides of the fence? +
Only the side we can access and protect properly can be sprayed, unless you have permission and access to the neighbour's side as well. In Telford, many fences sit on the boundary with limited rear access, so we confirm this at the visit and set expectations on what will be coated.
How long does fence paint take to dry after spraying? +
Most exterior fence coatings are touch-dry in a few hours in mild conditions, but they take longer to cure fully, especially in cooler or damp weather. We give a practical window for keeping pets, sprinklers, and garden furniture off the fence line so the finish is not marked.
What prep do you do before fence painting in Telford? +
Prep usually includes clearing growth at the base, cleaning off dirt and algae where present, scraping back any loose or flaking coating, and smoothing rough edges so they do not show through the new finish. The amount of prep is based on the actual condition of your timber, not a one-size checklist.
Can you spray fences near decking, patios, or artificial grass? +
Yes, provided the area can be masked and screened properly. We protect hard surfaces and nearby items before we spray, and we may choose calmer parts of the day or additional screening to keep the work tidy.
Will spraying cover stains and old colours completely? +
In most cases, yes, but full coverage depends on the product, the previous colour, and the timber's absorbency. Strong colour changes usually need two coats, and any resinous knots or stained areas may need spot treatment first so they do not bleed through.
Want your fence sprayed evenly with tidy prep and lasting colour?
Tell us what you have (panel type, length, and your preferred colour) and we will confirm the best approach, the prep required, and a clear written scope before work starts.